Descrição do produto
Air Compressor 7.5/11/15/22/32kw Permanent Magnet Variable Frequency Air Compressors
Industrial air compressor small size, reasonable layout, convenient maintenance and use, suitable for direct use on the production site, and small floor area.
Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency. 1.New design, new structure, stable quality,it has good heat dissipation .
2.Comprehensive upgrade of the manufacturing process, high-cost performance,good noise reduction and mute effect and long life.
3.Permanent magnet variable frequency motor, which is highly efficient and energy-saving.
Descrição do produto
| Modelo | Air pressure Mpa | F.A.D m³/min | Rated power KW | Noise dB | Drive method | Start method | Outlet valve |
| SR-VF7.5 | 0.8 | 1.1 | 7.5 | ≤76 | Direct | Frequency conversion start | R1/2 |
| 1 | 1 | ||||||
| 13 | 0.8 | ||||||
| 1.6 | 0.5 | ||||||
| SR-VF11 | 0.8 | 18 | 11 | R3/4 | |||
| 1 | 1.6 | ||||||
| 1 | 1.3 | ||||||
| 1.6 | 0.7 | ||||||
| SR-VF15 | 0.8 | 2.3 | 15 | ||||
| 1 | 2.1 | ||||||
| 1 | 1.7 | ||||||
| 1.6 | 1.2 | ||||||
| SR-VF22 | 0.8 | 3.6 | 22 | ≤80 | R1 | ||
| 1 | 3.2 | ||||||
| 1 | 2.3 | ||||||
| 1.6 | 2.0 | ||||||
| SR-VF30 | 0.8 | 5.0 | 30 | R1 1/2 | |||
| 1 | 3.5 | ||||||
| 1 | 3.3 | ||||||
| 1.6 | 2.6 | ||||||
| SR-VF37 | 0.8 | 6.1 | 37 | ||||
| 1 | 4.8 | ||||||
| 1.3 | 4.5 | ||||||
| 1.6 | 3.1 | ||||||
| SR-VF45 | 0.8 | 7.5 | 45 | ≤85 | |||
| 1 | 6.2 | ||||||
| 1 | 6.0 | ||||||
| 1.6 | 4.5 | ||||||
| SR-VF55 | 0.8 | 9.25 | 55 | R2 | |||
| 1 | 7.3 | ||||||
| 1 | 7 | ||||||
| 1.6 | 5.4 | ||||||
| SR-VF75 | 0.8 | 12 | 75 | ||||
| 1 | 9.2 | ||||||
| 1 | 8.9 | ||||||
| 1.6 | 6.8 | ||||||
| SR-VF90 | 0.8 | 16 | 90 | ≤95 | |||
| 1 | 12.5 | ||||||
| 1 | 12 | ||||||
| 1.6 | 8.6 | ||||||
| SR-VF110 | 0.8 | 20 | 110 | R2 1/2 | |||
| 1 | 18.5 | ||||||
| 1.3 | 15.8 | ||||||
| 16 | 11.5 | ||||||
| SR-VF132 | 0.8 | 23 | 132 | ||||
| 1 | 21.5 | ||||||
| 13 | 15 | ||||||
| 1.6 | 14 | ||||||
| SR-VF160 | 0.8 | 28 | 160 | ≤90 | DN65 | ||
| 1 | 22 | ||||||
| 13 | 21 | ||||||
| 1.6 | 19 | ||||||
| SR-VF185 | 0.8 | 30 | 185 | ||||
| 1 | 27 | ||||||
| 13 | 22 | ||||||
| 1.6 | 21 | ||||||
| SR-VF200 | 0.8 | 32 | 200 | ≤95 | DN80 | ||
| 1 | 29 | ||||||
| 13 | 27 | ||||||
| 1.6 | 21 | ||||||
| SR-VF220 | 0.8 | 38 | 220 | ||||
| 1 | 30 | ||||||
| 13 | 29 | ||||||
| 16 | 21 | ||||||
| SR-VF250 | 0.8 | 43 | 250 | ||||
| 1 | 39.5 | ||||||
| 1.3 | 31 | ||||||
| 16 | 28 |
Adopt a built-in oil separation setting to ensure the oil and gas separation effect and reduce fuel consumption
1.High filtration level and low flow resistance.
2.Good noise reduction and mute effect.
3.Oil and gas separation, high-temperature resistance, high-pressure resistance – reduce the oil content of the exhaust.
4.Clean exhaust to ensure clean gas.
Timely Smart Control Panel
1.Using a user-friendly interface to prompt operation, clear at a glance, real-time monitoring of information.
Company Profile
1.What can you buy from us?
DTH drilling rig,core drilling rig,highway pile driver,solar pile driver ,anchor pile driver,rotary drill rig ,Top Hammer drill rig,underground jumbo drill rig ,DTH hammer,drill rod,screw air compressor,water well drilling rig,truck mounted water well drilling rig,screw air compressor,piston air compressor,pneumatic rock drill ,drill bit,tricone bit ,spare parts.
2.How can I make payment?
A:You can pay by credit card, TT, Western Union, LC etc.
3.How is the shipment? How long dose it take?
A: For large quantity or heavy products, we ship by sea shipping or land shipping. Shipping efficiency depends on country and city you want to ship to. For small and delicate products, we ship by DHL, UPS, Fedex or TNT. You can also appoint shipping method you like before we ship.
4.How is your quality control?
A: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out.
|
Custo do frete:
Frete estimado por unidade. |
A negociar. |
|---|
| Serviço pós-venda: | Online Technical Services |
|---|---|
| Garantia: | 1 Year |
| Lubrication Style: | Lubricated |
.webp)
What is the impact of humidity on compressed air quality?
Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:
1. Corrosion:
High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.
2. Contaminant Carryover:
Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.
3. Decreased Efficiency of Pneumatic Systems:
Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.
4. Product Contamination:
In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.
5. Increased Maintenance Requirements:
Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.
6. Adverse Effects on Instrumentation:
Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.
To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.
.webp)
How do you troubleshoot common air compressor problems?
Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:
1. No Power:
- Check the power source and ensure the compressor is properly plugged in.
- Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
- Verify that the compressor’s power switch or control panel is turned on.
2. Low Air Pressure:
- Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
- Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
- Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.
3. Excessive Noise or Vibration:
- Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
- Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
- Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.
4. Air Leaks:
- Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
- Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
- Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.
5. Excessive Moisture in Compressed Air:
- Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
- Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
- Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.
6. Motor Overheating:
- Ensure the compressor’s cooling system is clean and unobstructed.
- Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
- Verify that the compressor is not being operated in an excessively hot environment.
- Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
- Consider using a thermal overload protector to prevent the motor from overheating.
If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.
.webp)
Existem compressores de ar portáteis disponíveis para uso doméstico?
Sim, existem compressores de ar portáteis projetados especificamente para uso doméstico. Esses modelos portáteis oferecem praticidade, versatilidade e facilidade de uso para diversas tarefas em casa. Aqui estão alguns pontos importantes sobre compressores de ar portáteis para uso doméstico:
1. Compacto e leve: Os compressores de ar portáteis são geralmente compactos e leves, facilitando o transporte e o armazenamento. São projetados pensando na portabilidade, permitindo que os usuários os movam pela casa ou os levem para diferentes locais conforme a necessidade.
2. Movido a eletricidade: A maioria dos compressores de ar portáteis para uso doméstico são movidos a eletricidade. Eles podem ser conectados a uma tomada elétrica padrão, eliminando a necessidade de gasolina ou outras fontes de combustível. Isso os torna adequados para uso interno sem preocupações com emissões ou ventilação.
3. Aplicações versáteis: Os compressores de ar portáteis podem ser usados em uma ampla gama de aplicações domésticas. São comumente usados para inflar pneus, equipamentos esportivos e brinquedos infláveis. Também são úteis para operar ferramentas pneumáticas, como pregadores pneumáticos, grampeadores e pistolas de pintura. Além disso, os compressores de ar portáteis podem ser usados para tarefas de limpeza, para alimentar aerógrafos e outras tarefas leves em casa.
4. Pressão e capacidade: Os compressores de ar portáteis para uso doméstico geralmente têm classificações de pressão e capacidade mais baixas em comparação com os modelos industriais ou comerciais maiores. Eles são projetados para atender às necessidades de tarefas domésticas comuns, e não para aplicações de alta exigência. A pressão e a capacidade desses compressores geralmente são suficientes para a maioria dos usuários domésticos.
5. Operação sem óleo: Muitos compressores de ar portáteis para uso doméstico funcionam sem óleo. Isso significa que não exigem trocas regulares de óleo ou manutenção, tornando-os mais fáceis de usar e sem complicações para os proprietários de residências.
6. Nível de ruído: Os compressores de ar portáteis projetados para uso doméstico geralmente priorizam baixos níveis de ruído. Eles são projetados para operar silenciosamente, reduzindo os incômodos sonoros em ambientes residenciais.
7. Custo: Os compressores de ar portáteis para uso doméstico são geralmente mais acessíveis em comparação com os compressores industriais maiores. Eles oferecem uma solução econômica para proprietários de residências que necessitam de ar comprimido ocasionalmente ou para aplicações de baixa intensidade.
Ao considerar um compressor de ar portátil para uso doméstico, é importante avaliar suas necessidades e tarefas específicas. Determine a pressão, a capacidade e os recursos necessários que estejam alinhados com as aplicações pretendidas. Além disso, leve em conta fatores como portabilidade, nível de ruído e orçamento para escolher um modelo adequado às suas necessidades.
De forma geral, os compressores de ar portáteis oferecem uma solução prática e acessível de ar comprimido para proprietários de casas, permitindo-lhes realizar diversas tarefas de forma eficiente e conveniente em casa.
Editor por CX 2023-10-02
