Product Description
Scope of application:
Using for Pushing Pneumatic Nail Gun, Air Screw , Spray Painting Gun to work, also use to miniature instrument, blowing dust, Air inflation for small car and so on.
Product Feature:
- High Power, high efficiency, low energy, high reliability.
- Piston Ring: New ECO circle, low friction coefficient, Auto lubricating system.
- Cylinder Liner: Surface hardening, deplete hardness, Accelerate the heat transfer, long using time.
- Suction and exhaust valve: Using advanced foreign technology.
- Multiple Pressure: Overload protection
| Power: | 1390w | Voltage: | 220V |
| Exhaust Pressure: | 0.8Mpa | Current: | 8.5A |
| Frequency: | 50HZ | Revolving Speed: | 2850rpm |
| Volume of Gas Storage Tank: | 18L | Cylinder: | 2×63.70mm |
Oilless Air Compressor Featuers:
1.Super Silent
Super low noise.The output air pressure is stable without fluctuations, reducing noise pollution.
2. Safety
If the voltage or current cause the machine overheat, it will automatically shut down to protect from burnout.
3. Automatic control
Pressure switch automatically controls the start and stop of the machine.
4. Adjustable air pressure
The air pressure can be adjusted to meet the needs of different equipment usage.
5. Save human power
Switch on the air compressor can work normally & automatically. It is easy to operate and does not need human to be on duty.
6. Easy maintenance
No need to add any lubricant, easy maintenance after purchase.
Parts Features
1.Heavy cast iron body: heavy load, long stroke, low fuel consumption, low noise
2.Cylinder: made of high-grade cast iron, strength, good lubricity, wall by the fine honing, wear-resistant, durable
3.Piston ring: good elasticity, excellent wear resistance, low oil consumption, not easy to make the valve group carbon deposition and loss of oil to burn the crankshaft and connecting rod.
4.The crankshaft, connecting rod, piston: well balanced, wear resistance, high strength, smooth running balance.
5.High reliable and durable valve; strong aluminum alloy body, light and heat.
6.The motor provides reliable power, low voltage start up and running performance strong fan cooled motor and body; special shock proof design.
7.Double nozzles, were used to direct the exhaust and pressure exhaust; pressure switch with push button, safe and convenient
8.Oil free,silent,protect-environment,suitable for dental use.
Frequency Asked Question
1.Are you the manufacturer or trading company?
We are the manufacturer.
2.Where is your factory?
It is located in HangZhou City,ZHangZhoug Province,China.
3.What’s the terms of trade?
FOB,CFR,CIF or EXW are all acceptable.
4.What’s the terms of payment?
T/T,L/C at sight or cash.
5.What’s the lead time?
We are the manufacturer.
It is located in HangZhou City,ZHangZhoug Province,China.
FOB,CFR,CIF or EXW are all acceptable.
T/T,L/C at sight or cash.
In 15 days on receipt of deposit .
6.Do you accept sample order?
Yes,we accept.
7.What about the cost of sample?
You have to pay the freight charge. But the cost of product could be refundable,if you will purchase 1×40’HQ container in the future.
Yes,we accept.
You have to pay the freight charge. But the cost of product could be refundable,if you will purchase 1×40’HQ container in the future.
| Lubrication Style: | Oil-free |
|---|---|
| Cooling System: | Air Cooling |
| Cylinder Arrangement: | Duplex Arrangement |
| Cylinder Position: | Vertical |
| Structure Type: | Open Type |
| Compress Level: | Double-Stage |
| Samples: |
US$ 90/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
editor by CX 2023-05-16
China high quality Double Compression Screw Type Permanent Magnet 10HP 22kw Industrial Rotary Screw Type Air Compressor Manufacturer 10 Bar Oil-Less air compressor oil
Product Description
|
Two-stage compression permanent magnet VSD |
|
|
♦ Intelligent Touch-Screen Design |
|
|
♦ Direct-driven |
|
|
♦ Air Cooling |
|
|
♦ 7/8/10/13bar |
|
|
♦ Air Filter |
|
|
♦ Stainless Steel |
|
|
♦ Piping Design |
Advantages
1. The most advanced split type design
2. The air end and motor are connected by the coupling, free from the trouble of maintenance.
3. Double screw highly efficient air end design of large rotor, larger compressed capacity, longer service life with imported CZPT bearings.
4. Permanent magnet motor
The motor is made of the special material of rare-earth permanent magnet, strong magnetic field, large overload torque and small current while starting and operation,
The special rare-earth permanent magnet with the special design of the rotor, makes the efficiency of the motor 10%-15% higher than the same horsepower induction motor.
Design of the lower temperature, the raise temperature of the motor<60K, greatly improves the service life and service factor.
Soft starter by the inverter
Avoiding the strong mechanical shock while starting, prolonging the life of machine, reducing the maintenance, improving the reliability. So it can save 30% energy.
| Model | Pressure (mpa) |
Displacement (m³/min) |
Power (kw) |
Dimension (mm) |
Weight (kg) |
Outlet Size |
| 2PV-0.7/15 | 0.7 | 0.7-3.0 | 15 | 1450*780*1180 | 660 | G1-1/4″ |
| 2PV-0.8/15 | 0.8 | 0.7-2.9 | ||||
| 2PV-1.0/15 | 1.0 | 0.6-2.4 | ||||
| 2PV-1.3/15 | 1.3 | 0.5-2.2 | ||||
| 2PV-0.7/18.5 | 0.7 | 0.9-3.8 | 18.5 | 1450*780*1180 | 680 | G1-1/2″ |
| 2PV-0.8/18.5 | 0.8 | 0.8-3.5 | ||||
| 2PV-1.0/18.5 | 1.0 | 0.7-2.9 | ||||
| 2PV-1.3/18.5 | 1.3 | 0.7-2.7 | ||||
| 2PV-0.7/22 | 0.7 | 1.1-4.5 | 22 | 1500*956*1219 | 730 | G1-1/2″ |
| 2PV-0.8/22 | 0.8 | 1.1-4.3 | ||||
| 2PV-1.0/22 | 1.0 | 0.8-3.5 | ||||
| 2PV-1.3/22 | 1.3 | 0.7-2.9 | ||||
| 2PV-0.7/30 | 0.7 | 1.6-6.8 | 30 | 1650*880*1280 | 980 | G1-1/2″ |
| 2PV-0.8/30 | 0.8 | 1.5-6.4 | ||||
| 2PV-1.0/30 | 1.0 | 1.2-4.9 | ||||
| 2PV-1.3/30 | 1.3 | 1.1-4.3 | ||||
| 2PV-0.7/37 | 0.7 | 1.9-7.5 | 37 | 1800*1254*1560 | 1080 | G1-1/2″ |
| 2PV-0.8/37 | 0.8 | 1.8-7.4 | ||||
| 2PV-1.0/37 | 1.0 | 1.5-6.3 | ||||
| 2PV-1.3/37 | 1.3 | 1.4-5.6 | ||||
| 2PV-0.7/45 | 0.7 | 2.3-10.2 | 45 | 2150*1410*1640 | 1980 | G2″ |
| 2PV-0.8/45 | 0.8 | 2.2-9.7 | ||||
| 2PV-1.0/45 | 1.0 | 1.9-7.8 | ||||
| 2PV-1.3/45 | 1.3 | 1.6-6.5 | ||||
| 2PV-0.7/55 | 0.7 | 3.02-13.1 | 55 | 2150*1410*1640 | 2180 | G2″ |
| 2PV-0.8/55 | 0.8 | 2.8-12.5 | ||||
| 2PV-1.0/55 | 1.0 | 2.3-10.1 | ||||
| 2PV-1.3/55 | 1.3 | 1.9-8.6 | ||||
| 2PV-0.7/75 | 0.7 | 4.2-17.5 | 75 | 2250*1410*1640 | 2280 | DN65 |
| 2PV-0.8/75 | 0.8 | 3.8-16.5 | ||||
| 2PV-1.0/75 | 1.0 | 3.4-13.6 | ||||
| 2PV-1.3/75 | 1.3 | 2.9-11.2 | ||||
| 2PV-0.7/90 | 0.7 | 5.3-20.8 | 90 | 2650*1654*1870 | 3200 | DN65 |
| 2PV-0.8/90 | 0.8 | 4.9-20.2 | ||||
| 2PV-1.0/90 | 1.0 | 4.1-16.9 | ||||
| 2PV-1.3/90 | 1.3 | 3.9-15.3 | ||||
| 2PV-0.7/110 | 0.7 | 6.1-24.5 | 110 | 2720*1800*1900 | 3360 | DN80 |
| 2PV-0.8/110 | 0.8 | 5.8-23.5 | ||||
| 2PV-1.0/110 | 1.0 | 5.1-20.1 | ||||
| 2PV-1.3/110 | 1.3 | 4.4-17.6 | ||||
| 2PV-0.7/132 | 0.7 | 7.2-30.1 | 132 | 2850*1854*1900 | 3450 | DN80 |
| 2PV-0.8/132 | 0.8 | 6.9-28.5 | ||||
| 2PV-1.0/132 | 1.0 | 6.1-24.1 | ||||
| 2PV-1.3/132 | 1.3 | 5.4-21.3 | ||||
| 2PV-0.7/160 | 0.7 | 8.8-35 | 160 | 2866*1730*1918 | 3850 | DN80 |
| 2PV-0.8/160 | 0.8 | 8.1-33.6 | ||||
| 2PV-1.0/160 | 1.0 | 7.7-31.1 | ||||
| 2PV-1.3/160 | 1.3 | 6.5-26.3 | ||||
| 2PV-0.7/185 | 0.7 | 10.7-42 | 185 | 3200*1730*1918 | 3990 | DN100 |
| 2PV-0.8/185 | 0.8 | 10.3-40 | ||||
| 2PV-1.0/185 | 1.0 | 8.8-35.5 | ||||
| 2PV-1.3/185 | 1.3 | 7.5-32.4 | ||||
| 2PV-0.7/200 | 0.7 | 10.7-44.8 | 200 | 3300*2060*2280 | 5890 | DN100 |
| 2PV-0.8/200 | 0.8 | 10.3-43 | ||||
| 2PV-1.0/200 | 1.0 | 9.2-38.6 | ||||
| 2PV-1.3/200 | 1.3 | 7.9-33 | ||||
| 2PV-0.7/220 | 0.7 | 11.7-48.0 | 220 | 4000*1780*1968 | 6500 | DN125 |
| 2PV-0.8/220 | 0.8 | 11.3-47.2 | ||||
| 2PV-1.0/220 | 1.0 | 9.8-41.2 | ||||
| 2PV-1.3/220 | 1.3 | 9.1-38.1 | ||||
| 2PV-0.7/250 | 0.7 | 13.2-55.3 | 250 | 4000*2120*2200 | 6800 | DN125 |
| 2PV-0.8/250 | 0.8 | 13.0-51.0 | ||||
| 2PV-1.0/250 | 1.0 | 11.0-46.9 | ||||
| 2PV-1.3/250 | 1.3 | 9.6-41.2 | ||||
| 2PV-0.7/280 | 0.7 | 14.4-60.0 | 280 | 4000*2120*2200 | 7200 | DN125 |
| 2PV-0.8/280 | 0.8 | 13.2-56.5 | ||||
| 2PV-1.0/280 | 1.0 | 12.2-51.5 | ||||
| 2PV-1.3/280 | 1.3 | 10.8-46.5 | ||||
| 2PV-0.7/315 | 0.7 | 16.2-67.5 | 315 | 4450*2200*2500 | 7800 | DN125 |
| 2PV-0.8/315 | 0.8 | 14.6-62.0 | ||||
| 2PV-1.0/315 | 1.0 | 13.2-56.5 | ||||
| 2PV-1.3/315 | 1.3 | 12.2-51.5 | ||||
| 2PV-0.7/280W | 0.7 | 14.4-60.0 | 280 | 3400*2100*2200 (Water coling) |
7200 | DN125 |
| 2PV-0.8/280W | 0.8 | 13.2-56.5 | ||||
| 2PV-1.0/280W | 1.0 | 12.2-51.5 | ||||
| 2PV-1.3/280W | 1.3 | 10.8-46.5 | ||||
| 2PV-0.7/315W | 0.7 | 16.2-67.5 | 315 | 2850*2050*2120 (Water coling) |
7800 | DN125 |
| 2PV-0.8/315W | 0.8 | 14.6-62.0 | ||||
| 2PV-1.0/315W | 1.0 | 13.2-56.5 | ||||
| 2PV-1.3/315W | 1.3 | 12.2-51.5 |
ZheJiang CZPT Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are able to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw air compressor
1.1 Oil-free screw air compressor
1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
2.1 Piston air compressor
2.2 Oil-free piston air compressor
2.3 Piston medium & high-pressure air compressor
3.Portable air compressor & Mining Equipment
3.1 Diesel or Electric portable screw air compressor
3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
4.1 CZPT or Adsorption compressed air drier
4.2 Compressed air filter or tank
4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace, if needed.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: How can we start order with your factory?
A: First, leave us an inquiry and advise which item you’re interested, and then we will contact you in 24 hours. You’re so kind if provide all detailed information, will better for us to know exactly what you need.
Q: What are your MOQ?
A: Different products have different MOQ, most is 1 set.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.
Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q: Do you a trade company or real factory?
A: We are 100% factory; we located in ZheJiang city, China.
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 1 Years |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
| Samples: |
US$ 1500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
editor by CX 2023-05-12
China Hot selling R22 9000BTU Hermetic Motor Rotary Compressor for CZPT Air Conditionign System supplier
Product Description
220V AC power vertical type r410a rechi rotary compressor rotativo for commercial ice make cream machine equipment hvac
Product Description
FS Hermetic rotary compressor designed for air conditioner,dehumidifier,other industrial equipment
air cooling device. take Eco-friendly R290 as refrigerant, provide enhanced reliability, reduced sound and maximum flexibility with vertical and horizontal installation options for air conditioning and refrigeration applications.
| Item | AC Fixed speed R410A rotary compressor |
| Brand | FS THERMO |
| Model | 39A173 |
| Voltage | AC 230V 50hz singel phase |
| Refrigerant | R410A |
| Height | 240mm |
| Net weight | 8.1kg |
| Cooling capacity | 2000wattW (6830Btu) |
| Evaporating Temp. | -10 ~ 15
ºC |
| Displacement | 8.6CC |
| Certification | ISO,CE |
| Payment | T/T 30% deposit,70% balance before shipment |
| Packing | Standard save packing or according to client’s requirement |
| Transportation | By sea/air or as request |
| Delivery port | HangZhou PORT/ZheJiang PORT |
production show
Dimension
Series Model:
| Model | Power supply | Mount Type | Application | Displacement | ASHRAE (7.2ºC) | POWER | Capacitor | Height | Test Condition | |
| Cooling Capacity | ||||||||||
| cm3 | W | Btu/h | W | mm | ||||||
| QXR-032H | 230V/50Hz | vertical | MBP/HBP | 3.2 | 440 | 1500 | 200 | 6uF/450VAC | 155 | ASHRAE/T |
| QXR-051H | 230V/50Hz | vertical | MBP/HBP | 5.1 | 715 | 2438 | 286 | 8uF/450VAC | 165 | ASHRAE/T |
| QXR-055H | 230V/50Hz | vertical | MBP/HBP | 5.5 | 750 | 2558 | 300 | 7uF/450VAC | 170 | ASHRAE/T |
| QXR-059H | 230V/50Hz | vertical | MBP/HBP | 5.9 | 810 | 2761 | 405 | 8uF/450VAC | 183 | ASHRAE/T |
| 35P0G3 | 230V/50Hz | vertical | MBP/HBP | 5.25 | 740 | 2523 | 278 | 7uF/450VAC | 190 | ASHRAE/T |
| 35P113HR | 230V/50Hz | vertical | MBP/HBP | 8.8 | 1250 | 4265 | 425 | 15uF/400VAC | 190 | ASHRAE/T |
| 39P153G | 230V/50Hz | vertical | MBP/HBP | 12.4 | 1820 | 6210 | 574 | 30uF/370VAC | 255 | ASHRAE/T |
| 44P193G | 230V/50Hz | vertical | MBP/HBP | 15.6 | 2305 | 7860 | 700 | 30uF/370VAC | 275 | ASHRAE/T |
| 44P233G | 230V/50Hz | vertical | MBP/HBP | 18 | 2660 | 9090 | 805 | 35uF/370VAC | 285 | ASHRAE/T |
| 44P2832 | 230V/50Hz | vertical | MBP/HBP | 22.2 | 3260 | 11130 | 990 | 35uF/370VAC | 287 | ASHRAE/T |
| 35Q073J | 230V/50Hz | vertical | MBP/HBP | 5.5 | 1115 | 3819 | 360 | 15uF/370VAC | 195 | HPD |
| 39Q083H | 230V/50Hz | vertical | MBP/HBP | 6.5 | 1370 | 4680 | 395 | 15uF/370VAC | 260 | HPD |
| 39Q093G | 230V/50Hz | vertical | MBP/HBP | 7 | 1465 | 5000 | 425 | 12uF/370VAC | 260 | HPD |
| 39Q103H | 230V/50Hz | vertical | MBP/HBP | 8.1 | 1675 | 5715 | 505 | 20uF/370VAC | 260 | HPD |
Application
portable air conditioner(AC), window type AC, splite type AC, dehumidifier equipment,heat dryer equipment,
liquid cooling system,window type AC,split type AC,other industrial equipment
Package and shipping
Sample order:
Each compressor was packaged in 1 carton box and non-fumigated wooden box.
Delivery time: Generally we have samples on stock. We can deliver as soon as receiving the payment.
Large order:
The compressors will be packaged in non-fumigated pallets.
Port:HangZhou or ZheJiang
Company Info
FS CZPT is a HVAC&R CZPT company who focus on the heating and cooling products designing, Production and marketing more than 15 years. We have serviced and cooperated with more than 100 customers in the global market. Our main product is CZPT heat exchanger, compressor, and integrated refrigeration unit, special Chiller unit and custom CZPT solution.The products including the Cooling module for chamber, Liquid Chiller Unit for batter cooling , cooling compressors , We always providing and investing innovational HVAC&R technology to enhance the customer experience and help us become a better business partner to you.
FAQ
1. What is the MOQ?
The MOQ is 1 piece.
2. What is the delivery time?
10days after payment for sample order, and 25days for bulk order.
3. What is the shipping port?
HangZhou or ZheJiang port.
4. What is the payment method?
We can accept T/T, Western Union, Paypal, L/C, etc.
5. What is our main product?
• air conditioning compressor,220v,110v,100v ,50/60hz
• Mini DC 12V/24V/48V compressor
• DC 12V/24V/48V/72V/312V compressor
• Mini chillier module , Mini condensing unit
• spot cooling system
• Rotary compressor for industry cooling , Dehumidifyer , water gen.
• Refrigeration compressor & Condensing unit for commercial refrigeration & transport refrigeration
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated|
|
|---|
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Year |
| Installation Type: | Stationary Type |
| Samples: |
US$ 75/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
editor by CX 2023-04-22
China supplier Variable Frequency Silent Air Compressor, Portable Air Compressor, Compact Air Compressor, Rotary Screw Oill Free Air Compressor air compressor CZPT freight
Product Description
Variable Frequency Silent Air Compressor, Portable Air Compressor, Compact Air Compressor, Rotary Screw Oill Free Air Compressor
The ETC oil-free conversion technology opens up completely new possibilities for providing oil free compressed air in meeting with ISO 8573-1 Class 0 quality standard.
When it comes to holding down up-front operational costs, converter technology is ideally suited for the provision of entirely oil free compressed air. And it is dependable too: Penetration of oil into the compressed air network is absolutely impossible!
Operating costs are extremely low because no costly checkups are required. Commonly occurring risks such as oil penetration have been discarded, and frequent replacement of component elements as with filters has been completely eliminated.
Features of CZPT ETC Series Oil Free Rotary Screw Air Compressor
1. Air quality to ISO8573-1 Class 0 standard with TUV certificate on request
2. Proven Eco-Tec Oil Free Converter technology from Germany and over thousands successful installation reference worldwide
3. Single stage airend design for easy and cost saving maintenance
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN standards
5. Modern concept suction valve with energy saving modulation control as option
6. Intelligent PLC control panel with sequential / remote control functions
7. Reliable automatic control box with “Siemens” contactors
8. High efficiency aftercooler (air- or water- cooled available)
Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air.
The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment.
Oil/hydrogen concentration is below 0,0571 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential.
ADEKOM (ASIA PACIFIC) LIMITED founded in the late 90’s is a specialized air/gas compressors and treatment system manufacturer with headquarter in Hong Kong. Its partners located in Vicenza, Italy and Germering, Germany are the world’s leading manufacturers with global recognition and experience in designing, manufacturing and marketing of rotary screw air/gas compressors for decades. QUALITY, RELIABILITY and ENERGY EFFICIENCY have been the main objectives of serving customers all over the world. CZPT follows the company core of its European partners, is committed to the research & development, quality assurance and satisfaction of customers’ needs. Today, what CZPT can do is not just to supply the best products to the market, but to provide THE TOTAL SOLUTION TO YOUR NEEDS!
CONTACT US
Asia Pacific Market: Spencer Lau (Ms.)
European/ Middle Eastern/ African Market: Echo Lok (Ms.)
American Market: Alice Kwok (Ms.)
| Lubrication Style: | Oil-free |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Angular |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Customization: |
Available
|
|
|---|
What to Look For When Buying an Air Compressor
An air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type.
Single-stage air compressors are quieter
When it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over three thousand hours.
While some single-stage air compressors are quieter than two-stage air compressors, both models have noise-reduction features. One type features rubber parts, which are designed to dampen noise. Another feature makes a compressor quieter: its location near the job site. Some models feature rubber base plugs and rubber mats to reduce floor vibrations. In addition to using these features, single-stage compressors are easier to transport.
Noise levels are important when choosing an air compressor. Some machines are too noisy for comfortable work, and some businesses don’t want to expose customers to noise-generating air compressors. Other noise levels can even endanger workers’ health. Single-stage air compressors are more affordable than dual-stage compressors. They are also quieter and more powerful. But be prepared for the noise. Some single-stage air compressors are still noisy.
Compared to their two-stage counterparts, single-stage compressors are quieter when running at full capacity. However, double-stage compressors are quieter on low capacities than single-stage units. Those with variable speed are quietest at lower capacities. The difference is about 10db. If you’re concerned about the noise level, you should consider a two-stage air compressor. But if you have a small workshop, it may not be suitable for you.
One-stage air compressors are generally more efficient than two-stage air compressors. The noise from a two-stage air compressor is lower because there’s no intermediate stage. Single-stage air compressors also use a piston that rotates in a single stage, while dual-stage air compressors, also known as duplex models, are more efficient. A single-stage air compressor is quieter, but double-stage compressors are louder.
Two-stage air compressors are more energy efficient
Two-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter.
Two-stage air compressors are more energy-efficient because they have two pistons instead of one. These air compressors achieve a higher pressure rating and recover more quickly. This type of compressor is perfect for jobs that require high air pressure for a prolonged period of time. In addition, they can operate multiple tools simultaneously. This makes them better for commercial and industrial use. Listed below are some benefits of two-stage air compressors.
Single-stage air compressors can power tools in the garage or kitchen, but they are not as reliable for industrial applications. Single-stage compressors have larger parts that tend to experience condensation. Furthermore, single-stage compressors do not last long in continuous use and are less energy-efficient than two-stage ones. Whether you’re using the compressor for a single tradesperson, a small crew, or a large construction crew, two-stage compressors are the best choice.
Single-stage air compressors are often used in small-scale food preparation and production. Single-stage air compressors are easy to transport between locations, and can be plugged into several electrical outlets. Single-stage compressors are also ideal for high-volume food processing. A dual-stage air compressor is ideal for industrial use. In some cases, you can even move the single-stage air compressor between two-stage air compressors.
Single-stage compressors often cycle too quickly, drawing more electricity than two-stage units. A variable speed unit stays on a low speed for hours at a time. Single-stage air conditioners force you to lower your thermostat settings while single-stage air conditioners run too often. Both units are energy-efficient but they are not as energy-efficient as variable-speed compressors. The main difference is that single-stage air conditioners tend to drain the power source quicker.
Piston-driven air compressors are quieter
A piston-driven air compressor is one of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The two main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet.
Older compressors are incredibly noisy. They produce a “wumpa” noise similar to a large engine. They are also capable of producing a high-pitched whine. These noises can be deafening, especially in a small workshop. That’s why it’s essential to look for a quiet compressor. But what makes a compressor quiet? Read on to learn more about this essential tool.
Another difference between piston-driven air compressors and electric-driven air compressors is the power source. Electric air compressors produce less noise than gas-powered compressors, which use an engine. Piston-driven air compressors are also more efficient. They also generate less heat, making them an ideal choice for offices and other settings where noise is a problem. The best way to decide between the two types of air compressors is to check the manufacturer’s warranty and read the ‘Description’.
Noise reduction is the first priority of a compressor’s owner, so make sure that you have the right model. If you’re working on something sensitive, don’t place the compressor too close to a building where people might be nearby. Noise can be very disruptive to the workspace and can cause health problems. To help combat noise, you’ll need to buy a quiet air compressor. And don’t forget to consider its location: Piston-driven air compressors are quieter than their reciprocating counterparts.
Piston-driven air compressors are quiet because the piston is made of thin metal and more rubber, which absorbs the sound. Unlike reciprocating air compressors, piston-driven air compressors are more efficient than their dual-piston cousins, which are quieter and more powerful. So which type is right for you? Take a look at some of the main differences between the two. If you want a quiet compressor, make sure it meets the specifications required by the job you’re working on.
Oil-lubricated air compressors are more cost-effective
There are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors.
Oil-free air compressors have some disadvantages. They are less durable and may not be as efficient as oil-lubricated models. Additionally, because oil-lubricated air compressors use oil, they can get very noisy. While they are less expensive, they are not the best option for heavy-duty work. However, modern oil-free air compressors have soundproofing and are suitable for industrial use.
When purchasing an oil-lubricated air compressor, make sure to choose one with a tank capacity that meets your needs and your space. Larger tanks can be more expensive than small tanks, but larger units are easier to move around. Also, be sure to consider the weight and size of the portable air compressors when making your choice. If the weight is too large, you may have trouble carrying it from place to place.
Another benefit of using oil-lubricated air compressors is their reduced need for oil. These models can last up to a decade longer than oil-free counterparts. Oil-free air compressors are more affordable and can achieve the same high performance as their oil-lubricated counterparts. Many industrial applications benefit from these air compressors. So, which one is right for you? We’ve listed a few of them below.
Another benefit of choosing an oil-lubricated air compressor is the reduced cost of maintenance. This type is more durable than its oil-lubricated counterparts, which require regular oil changes to keep them running smoothly. However, it is not feasible to transport an oil-lubricated compressor, which means that you must install it permanently to keep it working efficiently. In addition, these air compressors are difficult to move and are not portable, which can limit your ability to use it in a pinch.
editor by CX 2023-04-21
China 535cfm 13~14.5bar Heavy Duty Diesel Rotary Screw Air Compressor for Construction air compressor for sale
Merchandise Description
Mature Manufacturing unit Similar CZPT Trailer Mounted Portable Movable Diesel Screw Air Compressor 200-1800 cfm For Drilling Machine
Large Stress Movable Screw Air Compressor for Drilling Rig
Cell Diesel Run Air Compressor twenty five Bar for Effectively Drilling
Packaging & Shipping and delivery
FAQ
Q7: Can you give us your best price?
A7: Indeed, of training course. And we can supply much more steady quality products at a suitable cost.
Q8: You should deliver price tag list ?
A8: OK, could you remember to give us with your way of conversation?
Q9: Can you send out the true image of the item?
A9: Sure,of program,you please check out the images and videos,just let me know how a lot of you want ?
Q10: Would it be convenient to hand out your solution manual?
A10: Hi there,buddy,this is our catalog,and the product SUPC560-25-T is the most sizzling sell,do you want to much more introduction?
|
/ Piece | |
1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | Diesel Engine |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Movable Type |
###
| Customization: |
|---|
|
/ Piece | |
1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | Diesel Engine |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Movable Type |
###
| Customization: |
|---|
What to Look For When Buying an Air Compressor
An air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type.
Single-stage air compressors are quieter
When it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over three thousand hours.
While some single-stage air compressors are quieter than two-stage air compressors, both models have noise-reduction features. One type features rubber parts, which are designed to dampen noise. Another feature makes a compressor quieter: its location near the job site. Some models feature rubber base plugs and rubber mats to reduce floor vibrations. In addition to using these features, single-stage compressors are easier to transport.
Noise levels are important when choosing an air compressor. Some machines are too noisy for comfortable work, and some businesses don’t want to expose customers to noise-generating air compressors. Other noise levels can even endanger workers’ health. Single-stage air compressors are more affordable than dual-stage compressors. They are also quieter and more powerful. But be prepared for the noise. Some single-stage air compressors are still noisy.
Compared to their two-stage counterparts, single-stage compressors are quieter when running at full capacity. However, double-stage compressors are quieter on low capacities than single-stage units. Those with variable speed are quietest at lower capacities. The difference is about 10db. If you’re concerned about the noise level, you should consider a two-stage air compressor. But if you have a small workshop, it may not be suitable for you.
One-stage air compressors are generally more efficient than two-stage air compressors. The noise from a two-stage air compressor is lower because there’s no intermediate stage. Single-stage air compressors also use a piston that rotates in a single stage, while dual-stage air compressors, also known as duplex models, are more efficient. A single-stage air compressor is quieter, but double-stage compressors are louder.
Two-stage air compressors are more energy efficient
Two-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter.
Two-stage air compressors are more energy-efficient because they have two pistons instead of one. These air compressors achieve a higher pressure rating and recover more quickly. This type of compressor is perfect for jobs that require high air pressure for a prolonged period of time. In addition, they can operate multiple tools simultaneously. This makes them better for commercial and industrial use. Listed below are some benefits of two-stage air compressors.
Single-stage air compressors can power tools in the garage or kitchen, but they are not as reliable for industrial applications. Single-stage compressors have larger parts that tend to experience condensation. Furthermore, single-stage compressors do not last long in continuous use and are less energy-efficient than two-stage ones. Whether you’re using the compressor for a single tradesperson, a small crew, or a large construction crew, two-stage compressors are the best choice.
Single-stage air compressors are often used in small-scale food preparation and production. Single-stage air compressors are easy to transport between locations, and can be plugged into several electrical outlets. Single-stage compressors are also ideal for high-volume food processing. A dual-stage air compressor is ideal for industrial use. In some cases, you can even move the single-stage air compressor between two-stage air compressors.
Single-stage compressors often cycle too quickly, drawing more electricity than two-stage units. A variable speed unit stays on a low speed for hours at a time. Single-stage air conditioners force you to lower your thermostat settings while single-stage air conditioners run too often. Both units are energy-efficient but they are not as energy-efficient as variable-speed compressors. The main difference is that single-stage air conditioners tend to drain the power source quicker.
Piston-driven air compressors are quieter
A piston-driven air compressor is one of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The two main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet.
Older compressors are incredibly noisy. They produce a “wumpa” noise similar to a large engine. They are also capable of producing a high-pitched whine. These noises can be deafening, especially in a small workshop. That’s why it’s essential to look for a quiet compressor. But what makes a compressor quiet? Read on to learn more about this essential tool.
Another difference between piston-driven air compressors and electric-driven air compressors is the power source. Electric air compressors produce less noise than gas-powered compressors, which use an engine. Piston-driven air compressors are also more efficient. They also generate less heat, making them an ideal choice for offices and other settings where noise is a problem. The best way to decide between the two types of air compressors is to check the manufacturer’s warranty and read the ‘Description’.
Noise reduction is the first priority of a compressor’s owner, so make sure that you have the right model. If you’re working on something sensitive, don’t place the compressor too close to a building where people might be nearby. Noise can be very disruptive to the workspace and can cause health problems. To help combat noise, you’ll need to buy a quiet air compressor. And don’t forget to consider its location: Piston-driven air compressors are quieter than their reciprocating counterparts.
Piston-driven air compressors are quiet because the piston is made of thin metal and more rubber, which absorbs the sound. Unlike reciprocating air compressors, piston-driven air compressors are more efficient than their dual-piston cousins, which are quieter and more powerful. So which type is right for you? Take a look at some of the main differences between the two. If you want a quiet compressor, make sure it meets the specifications required by the job you’re working on.
Oil-lubricated air compressors are more cost-effective
There are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors.
Oil-free air compressors have some disadvantages. They are less durable and may not be as efficient as oil-lubricated models. Additionally, because oil-lubricated air compressors use oil, they can get very noisy. While they are less expensive, they are not the best option for heavy-duty work. However, modern oil-free air compressors have soundproofing and are suitable for industrial use.
When purchasing an oil-lubricated air compressor, make sure to choose one with a tank capacity that meets your needs and your space. Larger tanks can be more expensive than small tanks, but larger units are easier to move around. Also, be sure to consider the weight and size of the portable air compressors when making your choice. If the weight is too large, you may have trouble carrying it from place to place.
Another benefit of using oil-lubricated air compressors is their reduced need for oil. These models can last up to a decade longer than oil-free counterparts. Oil-free air compressors are more affordable and can achieve the same high performance as their oil-lubricated counterparts. Many industrial applications benefit from these air compressors. So, which one is right for you? We’ve listed a few of them below.
Another benefit of choosing an oil-lubricated air compressor is the reduced cost of maintenance. This type is more durable than its oil-lubricated counterparts, which require regular oil changes to keep them running smoothly. However, it is not feasible to transport an oil-lubricated compressor, which means that you must install it permanently to keep it working efficiently. In addition, these air compressors are difficult to move and are not portable, which can limit your ability to use it in a pinch.
editor by CX 2023-03-27
China Most Efficiency 7bar 8bar 10bar 132kw 175HP Direct Drive Oil Lubricated Fixed Speed/Variable Speed Drive (PM VSD) Rotary Screw Industrial Air Compressor best air compressor
Solution Description
OIL INJECTED ROTARY SCREW AIR COMPRESSOR (7~10bar Solitary Stage)
Product Parameters
Product Description
Scorching Sale Merchandise
2~10bar Oil-injected 7~16bar All-in-1 Small One-period
Screw Air Compressor Screw Air Compressor Screw Air Compressor
2~40bar 100% Oil-free 8~12bar 100% Oil-free Diesel Motor Transportable
Screw Air Compressor Scroll Air Compressor Screw Air Compressor
Principal Merchandise
What we can source:
* Oil-injected Screw Air Compressor (2~16 bar)
* All-in-1 Screw Air Compressor with Tank, Dryer, and Filters (7~16 bar)
* One-stage Modest Screw Air Compressor for House use (8~ten bar)
* Drinking water-injected Oil-free of charge Screw Air Compressor (2~forty bar)
* Oil-cost-free Scroll Air Compressor (8~12 bar)
* Diesel&Electrical Engine Portable Screw Air Compressor (8~thirty bar)
* Air Dryer, Air tank, Filters, and other Spare parts
|
US $15,000-30,000 / Set | |
1 Set (Min. Order) |
###
| After-sales Service: | 24*7 Online Services and Video Guide |
|---|---|
| Warranty: | 1 Year for The Whole Machine & 2 Years for Airend |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Installation Type: | Stationary Type |
###
| Customization: |
Available
|
|---|
|
US $15,000-30,000 / Set | |
1 Set (Min. Order) |
###
| After-sales Service: | 24*7 Online Services and Video Guide |
|---|---|
| Warranty: | 1 Year for The Whole Machine & 2 Years for Airend |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Installation Type: | Stationary Type |
###
| Customization: |
Available
|
|---|
The Air Compressor Is a Versatile Tool
The Air Compressor is one of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.
Oil-injected
Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.
Oil-free
What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
Gasoline
When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.
Electricity
Electricity in an air compressor is not cheap. A 25 HP air compressor runs for ten hours each day, five days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for three hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to four thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
Variable frequency drive
The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of six to seven bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is one of the best investments in your compressor. So, why wait any longer?
editor by czh 2023-01-16
China (SCR60M Series) German Engineered Transmission Belts Designed for Safety Belt Driven Rotary Screw Air Compressor High Efficiency 7/8/10/12.5/15bar with Good quality
Product Description
Product Specialized Description
| Product : | Oil Injected Screw Air Compressor Belt Driven (M collection) |
| Sort: | Oil Injected Belt Driven Screw Air Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Stress: | seven~twelve.5 bar |
| Installed Motor Energy: | 4KW~75KW |
| Potential: | .58~thirteen.3m3/min |
| Shade: | Blue |
| Pushed Approach: | Belt Driven |
| Air Stop: | Original Ally-get Air Stop from Germany |
| Trademark: | SCR |
| Transportation Deal: | Standard Wooden Packing |
| Available Certificate: | CE, ISO, UL, ASME, GHOST |
| Origin: | ZheJiang , China |
| application: | Casting , Metal , Plastic , Rubber |
Product Characteristics
one. Sino-Japan technological innovation cooperation, large dependability.
two. Big airend with low rpm for much better efficiency an prolonged existence span.
three. Substantial trustworthiness parts imported authentic from Germany, Swiss and many others.
4. CE level security style and producing
five. Oversize cooler appropriate for tropical spot.
6. Much more than ten,000.00 units working all around the planet because 10years in the past.
seven. Intelligent PLC control.
eight. Effortless to do maintenance and support.
1.Automated interlock control and operations administration
Clever microcomputer controller, mixed with pressure, temperature, current, sign, alarm with 12 important indicators and thirteen complete protection defense steps with Chinese and English display optional and maintenance time limit remind. The RS485 communication interface can realize numerous equipment joint control. Concise and complete to maintain the consumer knowledgeable of the machines’ situation in time.
2.Risk-free and zero leakage connection
SCR have deserted the standard lower price hydraulic hose layout. CZPT use Higher-rigid pipes and flexible joint relationship, steering clear of bursts generally induced by ageing . Fluorine rubber type -ring provides a adaptable seal preventing leakage.
three.large obligation air filter with prefilter
A European imported air filter offers Large efficiency and a low strain drop.
four.Siemens model electrical elements
five.American brand large effectiveness transmission system
| Model | SCR60M-eight | SCR60M-ten | SCR60M-12.5 | |
| Capacity/Force(m3/min,/BAR) | seven.51/8 | 6.82/ten | five.fifty three/12.5 | |
| TEFC Motor | Energy(KW) | 45KW(60H.P) | ||
| Speed(r/min) | 2962 | |||
| Starting way | Star-Delta | |||
| Volt(V) | 380/four hundred/415(220) | |||
| Motor safety grade | IP54 | |||
| Motor isolation grade | F | |||
| Electrical Supply | 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P | |||
| Outlet Temperature(ºC) | ≤ Environment Temperature+10ºC | |||
| Driven way | Belt Driven | |||
| Noise level at 1 meter | 76±3dB(A) | |||
| Cooling method | Air cooling | |||
| Oil content | ≤3 ppm | |||
| Outlet Connection | Rc 1 1/2″ | |||
| Dimension | Duration(mm) | 1000 | ||
| Width(mm) | 1300 | |||
| Top(mm) | 1470 | |||
| Weight(KG) | 920 | |||
Solution Groups
Benefits
Application
About SCR
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Type: | Single Screw Compressor |
###
| Customization: |
Available
|
|---|
###
| Model : | Oil Injected Screw Air Compressor Belt Driven (M series) |
| Type: | Oil Injected Belt Driven Screw Air Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Pressure: | 7~12.5 bar |
| Installed Motor Power: | 4KW~75KW |
| Capacity: | 0.58~13.3m3/min |
| Color: | Blue |
| Driven Method: | Belt Driven |
| Air End: | Original Ally-win Air End from Germany |
| Trademark: | SCR |
| Transport Package: | Standard Wooden Packing |
| Available Certificate: | CE, ISO, UL, ASME, GHOST |
| Origin: | Shanghai, China |
| application: | Casting , Metal , Plastic , Rubber |
###
| Model | SCR60M-8 | SCR60M-10 | SCR60M-12.5 | |
| Capacity/Pressure(m3/min,/BAR) | 7.51/8 | 6.82/10 | 5.53/12.5 | |
| TEFC Motor | Power(KW) | 45KW(60H.P) | ||
| Speed(r/min) | 2962 | |||
| Starting way | Star-Delta | |||
| Volt(V) | 380/400/415(220) | |||
| Motor safety grade | IP54 | |||
| Motor isolation grade | F | |||
| Electrical Supply | 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P | |||
| Outlet Temperature(ºC) | ≤ Environment Temperature+10ºC | |||
| Driven way | Belt Driven | |||
| Noise level at 1 meter | 76±3dB(A) | |||
| Cooling method | Air cooling | |||
| Oil content | ≤3 ppm | |||
| Outlet Connection | Rc 1 1/2" | |||
| Dimension | Length(mm) | 1000 | ||
| Width(mm) | 1300 | |||
| Height(mm) | 1470 | |||
| Weight(KG) | 920 | |||
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Type: | Single Screw Compressor |
###
| Customization: |
Available
|
|---|
###
| Model : | Oil Injected Screw Air Compressor Belt Driven (M series) |
| Type: | Oil Injected Belt Driven Screw Air Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Pressure: | 7~12.5 bar |
| Installed Motor Power: | 4KW~75KW |
| Capacity: | 0.58~13.3m3/min |
| Color: | Blue |
| Driven Method: | Belt Driven |
| Air End: | Original Ally-win Air End from Germany |
| Trademark: | SCR |
| Transport Package: | Standard Wooden Packing |
| Available Certificate: | CE, ISO, UL, ASME, GHOST |
| Origin: | Shanghai, China |
| application: | Casting , Metal , Plastic , Rubber |
###
| Model | SCR60M-8 | SCR60M-10 | SCR60M-12.5 | |
| Capacity/Pressure(m3/min,/BAR) | 7.51/8 | 6.82/10 | 5.53/12.5 | |
| TEFC Motor | Power(KW) | 45KW(60H.P) | ||
| Speed(r/min) | 2962 | |||
| Starting way | Star-Delta | |||
| Volt(V) | 380/400/415(220) | |||
| Motor safety grade | IP54 | |||
| Motor isolation grade | F | |||
| Electrical Supply | 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P | |||
| Outlet Temperature(ºC) | ≤ Environment Temperature+10ºC | |||
| Driven way | Belt Driven | |||
| Noise level at 1 meter | 76±3dB(A) | |||
| Cooling method | Air cooling | |||
| Oil content | ≤3 ppm | |||
| Outlet Connection | Rc 1 1/2" | |||
| Dimension | Length(mm) | 1000 | ||
| Width(mm) | 1300 | |||
| Height(mm) | 1470 | |||
| Weight(KG) | 920 | |||
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
editor by czh 2023-01-13
China China Low Pressure Electric Oil Free Rotary Screw Air Compressor portable air compressor
Item Description
Company PROFILE
KY-200KYG Air Compressor (can be personalized) :
Common Functions:
Permanent magnet inverter compressor because of its energy saving and high efficiency has become a hot and bright spot of the industry, the original air compressor energy consumption on the market, is gradually being the permanent magnet inverter compressor to replace or substitution, users can directly bring cost saveing of 20%-forty%.
With the development of science and technology, air compressor is widely used in many industries such as machinery, metallurgy, building components, electric power, chemical industry, food, textile and so on. However, the air compressor belongs to the high energy consumption tools, power consumption in some industries accounted for more than 30% og the power consumption of production, it is commonly known as “electric tiger”.
Specific Attributes:
1,AIR Stress STABILLTY
Due to the use of screw air compressor variable frequency stepless speed regulation characteristics of inverter, inverter controller or regulator through internal PID, can smoothly start on consumption volatility is relatively large occasions, and can quicklyh adjust the response. Compared with the upper and lower limit switch control of the power frequency operation, the air pressure stability increases exponentially.
2,START NO IMPACT
Because the transducer itself contained the function of soft starter, starting current within the maximum rated current of 1.2 times, compared with the start frequency in general more than 6 times the rated current, start a little impact.
This affect is not only on the grid, the effect of the complete mechanical program, but also drastically lowered.
three,VARIABLE FLOW CONTROL
Power driven air compressor can only work in an exhaust, inverter air compressor can work in a wide range of exhaust. Frequency converter is based on the actual use of gas in real time to adjust the motor speed to control the amount of exhaust.
When the air volume is low, the air compressor can be automatically dormant. thereby greatly redcing the energy loss. The optimized control strategy can further improve the energy saving effect.
4,AC POWER SUPPLY VOLTAGE BETTER
Because of the over modulation technology of the inverter, the output voltage of the motor can be output when the voltage of the AC power supply is low, and the voltage of the output to the motor is too high.
For the era of energy, frequeucy conversion travel can present its positive aspects.
five,AC POWER SUPPLY VOLTAGE BETTER
Most of the working condition of the frequency conersion system is lower than the rated speed of the work, the host machine noise and wear down, prolongmain- tenance and service life.
If the supporter is also driven by frequency conversion, can drastically lessen the nosie of air compressor perform.
Technical PARAMETERS:
| Product | Electricity | Strain (Mpa) |
Air movement | Sound | Stage | Exit pipe diameter |
Excess weight (KG) |
Dimensions (mm(LxWxH) |
| PE-10AVF | 7.five | 8 | one. | 60±2 |
Single quality |
3/4 |
280 | 1000*600*one hundred |
| 10 | .8 | |||||||
| PE-20AVF | 8 | 2.2 | 60±2 |
Single grade |
1 | 480 | 1150*800*1280 | |
| 10 | 1.8 | |||||||
| PE-30AVF | 22 | 8 | three.eight | 62±2 |
Single grade |
11/4 |
520 | 1150*800*1280 |
| 10 | three. | |||||||
| PE-40AVF | 30 | eight | 5. |
63±2 | Single quality |
11/four |
550 | 1150*800*1280 |
| ten | 4.four | |||||||
| PE-50AVF | 37 | eight | 6.8 |
63±2 | Single grade |
11/two |
650 | 1300*one thousand*1450 |
| 10 | five.four | |||||||
| PE-60AVF | 45 | eight | eight. |
65±2 | Single grade |
11/two |
750 | 1300*one thousand*1450 |
| ten | 6.8 | |||||||
| PE-75AVF | eight | 9.7 | 65±2 | Single quality |
2 | 1200 | 1700*1270*1500 | |
| 10 | eight.6 | |||||||
| PE-100AVF | 75 | eight | thirteen.2 | 65±2 | Single quality |
2 | 1350 | 1700*1270*1500 |
| ten | 16.1 |
Strength-SAVING EFFECT OF TWO-STAGE COMPRESSION:
According to the engineering thermodynamics concept, it is the most inexpensive for the compressor with isothermal compres-
sion.Two-stage oil-injection screw air compressor is designed based on the above theory, it fully improves the cooling function through oil injection during the two-stage compression, plus the inter-stage cooling, by ensuring the temperature is above the pressure dew point, it can be close to isothermal compression as possible, so as to achieve the energy-saving effect.
At the same time, due to low compression ratio of the two-stage airend, the “internal leakage”is largely reduced in the compression process compared with the single-stage compression airend with the same power and same discharge pressure.On the contrary, the diplacement is increased, which means that the efficiency is increased, and the specific power is reduced.
Compared with the ordinary two-stage permanent magnetic compressor on the market,Moair uses the two-drive and two-stage compres- sion, which directly avoids the power loss inside the gear set.
Energy-conserving advantages:
one,To reduce the bearing load, and improve the volumetric efficincy
2,In the scenario of partial load operation, it can increase performance and grow to be vitality preserving to a better extent.
3,The energy saving of two-stage screw air compressor is up to 15%-25% than that of the one-stage air compressor, which can save the considerable electricity fees every year.
About shipping and delivery
Why pick us?
FAQ:
one.Q:What do you need machine and quotation?
A: According to capacity and factory size ,we can give you details.
two.Q: Are you buying and selling business or manufacturer ?
A:We are manufacturing facility.
3.Q:How do we pack machine?
A:Exporting wooden cases
four.Q:Lead time
A:Around 25-30 days after the receipt of your deposit.
|
US $1,000-42,298 / set | |
1 set (Min. Order) |
###
| Type: | High Pressure Gun |
|---|---|
| Usage: | Paint Spray Gun, Washing Gun, Hopper Gun, Garden Gun |
| Working Style: | Rotary Type |
| Air Wrench Type: | Pulse pneumatic wrench |
| Pneumatic Drill Range: | Tunnel |
| Degree of Automation: | Automatic |
###
| Customization: |
Available
|
|---|
###
| Model | Power | Pressure (Mpa) |
Air flow | Noise | Stage | Exit pipe diameter |
Weight (KG) |
Dimensions (mm(LxWxH) |
| PE-10AVF | 7.5 | 8 | 1.0 | 60±2 |
Single grade |
3/4 |
280 | 1000*600*100 |
| 10 | 0.8 | |||||||
| PE-20AVF | 8 | 2.2 | 60±2 |
Single grade |
1 | 480 | 1150*800*1280 | |
| 10 | 1.8 | |||||||
| PE-30AVF | 22 | 8 | 3.8 | 62±2 |
Single grade |
11/4 |
520 | 1150*800*1280 |
| 10 | 3.0 | |||||||
| PE-40AVF | 30 | 8 | 5.0 |
63±2 | Single grade |
11/4 |
550 | 1150*800*1280 |
| 10 | 4.4 | |||||||
| PE-50AVF | 37 | 8 | 6.8 |
63±2 | Single grade |
11/2 |
650 | 1300*1000*1450 |
| 10 | 5.4 | |||||||
| PE-60AVF | 45 | 8 | 8.0 |
65±2 | Single grade |
11/2 |
750 | 1300*1000*1450 |
| 10 | 6.8 | |||||||
| PE-75AVF | 8 | 9.7 | 65±2 | Single grade |
2 | 1200 | 1700*1270*1500 | |
| 10 | 8.6 | |||||||
| PE-100AVF | 75 | 8 | 13.2 | 65±2 | Single grade |
2 | 1350 | 1700*1270*1500 |
| 10 | 16.1 |
|
US $1,000-42,298 / set | |
1 set (Min. Order) |
###
| Type: | High Pressure Gun |
|---|---|
| Usage: | Paint Spray Gun, Washing Gun, Hopper Gun, Garden Gun |
| Working Style: | Rotary Type |
| Air Wrench Type: | Pulse pneumatic wrench |
| Pneumatic Drill Range: | Tunnel |
| Degree of Automation: | Automatic |
###
| Customization: |
Available
|
|---|
###
| Model | Power | Pressure (Mpa) |
Air flow | Noise | Stage | Exit pipe diameter |
Weight (KG) |
Dimensions (mm(LxWxH) |
| PE-10AVF | 7.5 | 8 | 1.0 | 60±2 |
Single grade |
3/4 |
280 | 1000*600*100 |
| 10 | 0.8 | |||||||
| PE-20AVF | 8 | 2.2 | 60±2 |
Single grade |
1 | 480 | 1150*800*1280 | |
| 10 | 1.8 | |||||||
| PE-30AVF | 22 | 8 | 3.8 | 62±2 |
Single grade |
11/4 |
520 | 1150*800*1280 |
| 10 | 3.0 | |||||||
| PE-40AVF | 30 | 8 | 5.0 |
63±2 | Single grade |
11/4 |
550 | 1150*800*1280 |
| 10 | 4.4 | |||||||
| PE-50AVF | 37 | 8 | 6.8 |
63±2 | Single grade |
11/2 |
650 | 1300*1000*1450 |
| 10 | 5.4 | |||||||
| PE-60AVF | 45 | 8 | 8.0 |
65±2 | Single grade |
11/2 |
750 | 1300*1000*1450 |
| 10 | 6.8 | |||||||
| PE-75AVF | 8 | 9.7 | 65±2 | Single grade |
2 | 1200 | 1700*1270*1500 | |
| 10 | 8.6 | |||||||
| PE-100AVF | 75 | 8 | 13.2 | 65±2 | Single grade |
2 | 1350 | 1700*1270*1500 |
| 10 | 16.1 |
what to see in an air compressor
If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.
Pump
If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying one from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.
safety equipment
There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these two safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.
CFM Rating
An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in one square inch of air. These two indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
Lack of oil and lubrication
Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
noise level
If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
editor by czh 2023-01-07
China Made in China Bk15kw-8bar Electric Rotary Screw Air Compressor small air compressor
Item Description
Item Description
HS collection compressors are created in accordance with the subtropical large temperature and large humidity working setting, and the optimized cooling design guarantees that the device can run usually in a high temperature atmosphere of 46°C.
Solution Function
one. Adhering to the notion of pursuing substantial-good quality merchandise, HS collection compressors are created in accordance with the subtropical large temperature and higher humidity doing work setting, and the optimized cooling style ensures that the unit can function repeatedly and generally in a high temperature surroundings of forty six °C.
two. Adopt the planet-renowned CZPT principal motor. The protection quality is IP55. The insulation quality is F grade a hundred.
three. The gas circuit adopts the stainless steel pipe design and style of the American SAE regular, with lower resistance and strong corrosion resistance, which fully gets rid of the widespread issues of oil leakage, air leakage and air leakage below substantial stress.
4. The patented synchronous two-phase compression engineering is adopted, so that the compression ratio of every stage of the screw host is considerably less than 6, which is lower than that of the ordinary screw air compressor, which guarantees the service life of the screw host.
5. Every single phase of the screw host has an impartial oil cooling system and an computerized water removing technique to guarantee that the screw host can run stably close to the clock.
6. The effective third-generation e-Handle controller has 6 procedure checking points to comprehensively keep track of the doing work circumstances of the main engine, air filter, oil filter, oil separator, cooler and other critical components, so that the compressor can run stably.
Specification
| Method | HSV75A (W)-40 | HSV90A (W)-forty | HSV110A (W)-forty | HSV132A (W)-forty |
| Running Strain Bar (g) | forty | 40 | forty | 40 |
| Motor speed (kw) | seventy five | 90 | a hundred and ten | 132 |
| Exhaust volume (m³/min) | five.five | seven.two | 9. | 10. |
| Cooling technique | h2o cooling | h2o cooling | h2o cooling | water cooling |
| Sound dB(A) | seventy two(75) | 74(seventy eight) | 74(seventy eight) | seventy four(78) |
| Duration | 2550 | 3150 | 3150 | 3150 |
| Width | 1480 | 1880 | 1880 | 1880 |
| Top | 1850 | 1850 | 1850 | 1850 |
| Mode | HSV75A (W)-35 | HSV110A (W)-thirty | HSV55A-twenty five | HSV90A-twenty five |
| Functioning Stress Bar(g) | 35 | 30 | twenty five | 25 |
| Motor pace (kw) | 75 | a hundred and ten | fifty five | ninety |
| Exhaust quantity (m³/min) | 7.6 | eleven. | five.four | 9.five |
| Cooling strategy | air cooling (water cooling ) | air cooling(h2o cooling ) | 74(78) | air cooling |
| Sounds dB(A) | seventy two(seventy five) | 74(seventy eight) | seventy two(75) | seventy four(78) |
| Length | 2550 | 3150 | 2550 | 3150 |
| Width | 1480 | 1880 | 1480 | 1880 |
| Height | 1850 | 1850 | 1850 | 1850 |
| Manner | HSV180A-twenty five | HSV110A (W)-twenty | ||
| Working Force Ba(g) | 25 | 20 | ||
| Motor speed (kw) | 180 | one hundred ten | ||
| Exhaust volume (m³/min) | 19. | 12.five | ||
| Cooling technique | air cooling(drinking water cooling ) | air cooling(h2o cooling ) | ||
| Sound dB(A) | seventy eight(82) | seventy four(78) | ||
| Length | 3980 | 3150 | ||
| Width | 1980 | 1880 | ||
| Height | 1980 | 1850 |
|
US $3,500-45,000 / Set | |
1 Set (Min. Order) |
###
| After-sales Service: | Online |
|---|---|
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
###
| Customization: |
Available
|
|---|
###
| Mode | HSV75A (W)-40 | HSV90A (W)-40 | HSV110A (W)-40 | HSV132A (W)-40 |
| Operating Pressure Bar (g) | 40 | 40 | 40 | 40 |
| Motor speed (kw) | 75 | 90 | 110 | 132 |
| Exhaust volume (m³/min) | 5.5 | 7.2 | 9.0 | 10.0 |
| Cooling method | water cooling | water cooling | water cooling | water cooling |
| Noise dB(A) | 72(75) | 74(78) | 74(78) | 74(78) |
| Length | 2550 | 3150 | 3150 | 3150 |
| Width | 1480 | 1880 | 1880 | 1880 |
| Height | 1850 | 1850 | 1850 | 1850 |
| Mode | HSV75A (W)-35 | HSV110A (W)-30 | HSV55A-25 | HSV90A-25 |
| Operating Pressure Bar(g) | 35 | 30 | 25 | 25 |
| Motor speed (kw) | 75 | 110 | 55 | 90 |
| Exhaust volume (m³/min) | 7.6 | 11.0 | 5.4 | 9.5 |
| Cooling method | air cooling (water cooling ) | air cooling(water cooling ) | 74(78) | air cooling |
| Noise dB(A) | 72(75) | 74(78) | 72(75) | 74(78) |
| Length | 2550 | 3150 | 2550 | 3150 |
| Width | 1480 | 1880 | 1480 | 1880 |
| Height | 1850 | 1850 | 1850 | 1850 |
| Mode | HSV180A-25 | HSV110A (W)-20 | ||
| Operating Pressure Ba(g) | 25 | 20 | ||
| Motor speed (kw) | 180 | 110 | ||
| Exhaust volume (m³/min) | 19.0 | 12.5 | ||
| Cooling method | air cooling(water cooling ) | air cooling(water cooling ) | ||
| Noise dB(A) | 78(82) | 74(78) | ||
| Length | 3980 | 3150 | ||
| Width | 1980 | 1880 | ||
| Height | 1980 | 1850 |
|
US $3,500-45,000 / Set | |
1 Set (Min. Order) |
###
| After-sales Service: | Online |
|---|---|
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
###
| Customization: |
Available
|
|---|
###
| Mode | HSV75A (W)-40 | HSV90A (W)-40 | HSV110A (W)-40 | HSV132A (W)-40 |
| Operating Pressure Bar (g) | 40 | 40 | 40 | 40 |
| Motor speed (kw) | 75 | 90 | 110 | 132 |
| Exhaust volume (m³/min) | 5.5 | 7.2 | 9.0 | 10.0 |
| Cooling method | water cooling | water cooling | water cooling | water cooling |
| Noise dB(A) | 72(75) | 74(78) | 74(78) | 74(78) |
| Length | 2550 | 3150 | 3150 | 3150 |
| Width | 1480 | 1880 | 1880 | 1880 |
| Height | 1850 | 1850 | 1850 | 1850 |
| Mode | HSV75A (W)-35 | HSV110A (W)-30 | HSV55A-25 | HSV90A-25 |
| Operating Pressure Bar(g) | 35 | 30 | 25 | 25 |
| Motor speed (kw) | 75 | 110 | 55 | 90 |
| Exhaust volume (m³/min) | 7.6 | 11.0 | 5.4 | 9.5 |
| Cooling method | air cooling (water cooling ) | air cooling(water cooling ) | 74(78) | air cooling |
| Noise dB(A) | 72(75) | 74(78) | 72(75) | 74(78) |
| Length | 2550 | 3150 | 2550 | 3150 |
| Width | 1480 | 1880 | 1480 | 1880 |
| Height | 1850 | 1850 | 1850 | 1850 |
| Mode | HSV180A-25 | HSV110A (W)-20 | ||
| Operating Pressure Ba(g) | 25 | 20 | ||
| Motor speed (kw) | 180 | 110 | ||
| Exhaust volume (m³/min) | 19.0 | 12.5 | ||
| Cooling method | air cooling(water cooling ) | air cooling(water cooling ) | ||
| Noise dB(A) | 78(82) | 74(78) | ||
| Length | 3980 | 3150 | ||
| Width | 1980 | 1880 | ||
| Height | 1980 | 1850 |
A Buyer’s Guide to Air Compressor Types
There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
Single-stage air compressors
A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.
Rotary vane compressors
Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
Rotary vane compressors with low-noise models
If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
Rotary vane compressors with two pistons
The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.
editor by czh 2023-01-04
China High Efficiency AC Power Source Air Compressor Made in China Energy Saving Rotary Screw Air Compressor small air compressor
Product Description
|
Solution Title: Manufactured in China ISO9001 Certificate |
Parameter
| MODEL | Optimum Functioning Strain | Totally free AIR Supply* OF Device AT Doing work Pressure | MOTOR | Sound Amount | AIR OUTLET DISCHARGE Dimensions | Weight | Dimensions | ||||
| Bar | PSI | l/s | m3/min | CFM | kW | HP | dBA | (mm) | KG | (mm) | |
| MCS-7.5 | seven | 102 | twenty | 1.2 | 43 | 7.five | 10 | 65±2 | G3/4 | 250 | 800 x 720 x 950 |
| 8 | 116 | eighteen | 1.one | 39 | |||||||
| ten | 145 | 15 | .nine | 32 | |||||||
| twelve | 174 | thirteen | .seventy five | 27 | |||||||
| thirteen | 189 | eleven | .65 | 23 | |||||||
| MCS-eleven | 7 | 102 | 28 | 1.65 | fifty nine | 11 | 15 | 70±2 | G3/4 | 350 | 950 x 800 x1160 |
| eight | 116 | twenty five | 1.5 | 54 | |||||||
| 10 | 145 | 22 | 1.3 | forty six | |||||||
| 12 | 174 | eighteen | 1.one | 39 | |||||||
| 13 | 189 | seventeen | 1 | 36 | |||||||
| MSC-15 | 7 | 102 | forty two | 2.5 | 89 | 15 | 20 | 70±2 | G3/4 | 400 | 950 x 800 x 1160 |
| 8 | 116 | 38 | two.three | 82 | |||||||
| ten | 145 | 35 | 2.1 | seventy five | |||||||
| 12 | 174 | 32 | one.nine | sixty eight | |||||||
| 13 | 189 | 28 | 1.7 | 61 | |||||||
| MCS-eighteen.5 | 7 | 102 | fifty three | one.one | 114 | 18.5 | 25 | 72±2 | G1 | 550 | 1150 x 900 x1380 |
| 8 | 116 | 50 | 2.five | 107 | |||||||
| 10 | one hundred forty five | 45 | two.three | ninety six | |||||||
| 12 | 174 | 40 | 2.four | 86 | |||||||
| 13 | 189 | 35 | 2.one | seventy five | |||||||
| MCS-22 | seven | 102 | 63 | 3.8 | 136 | 22 | 30 | 73±2 | G1 | 600 | 1150 x 900 x1380 |
| 8 | 116 | sixty | three.6 | 129 | |||||||
| 10 | one hundred forty five | 53 | 3.two | 114 | |||||||
| twelve | 174 | 45 | 2.7 | ninety six | |||||||
| thirteen | 189 | 38 | two.3 | 82 | |||||||
| MCS-30 | seven | 102 | 88 | five.three | 189 | 30 | 40 | 74±2 | G1 | 650 | 1150 x 900 x1380 |
| 8 | 116 | 83 | five | 179 | |||||||
| ten | a hundred forty five | 75 | four.five | 161 | |||||||
| 12 | 174 | 67 | four | 143 | |||||||
| 13 | 189 | 60 | three.6 | 129 | |||||||
| MCS-37 | 7 | 102 | 113 | 6.eight | 243 | 37 | 50 | 74±2 | G11/2 | 800 | 1320 x one thousand x1500 |
| eight | 116 | 103 | six.two | 221 | |||||||
| 10 | one hundred forty five | ninety three | 5.six | two hundred | |||||||
| twelve | 174 | eighty three | 5 | 179 | |||||||
| 13 | 189 | seventy five | 4.5 | 161 | |||||||
| MCS-forty five | 7 | 102 | 123 | 7.4 | 264 | 45 | 60 | 74±2 | G11/2 | 900 | 1320 x 1000 x1840 |
| eight | 116 | 117 | 7 | 250 | |||||||
| ten | 145 | 103 | 6.2 | 221 | |||||||
| twelve | 174 | ninety three | five.six | 200 | |||||||
| thirteen | 189 | 83 | five | 179 | |||||||
| MCS-fifty five | 7 | 102 | 167 | ten | 357 | 55 | 75 | 75±2 | G2 | 1300 | 1600 x 1470 x1460 |
| eight | 116 | 153 | 9.two | 329 | |||||||
| 10 | one hundred forty five | 142 | 8.5 | 304 | |||||||
| twelve | 174 | 127 | 7.six | 271 | |||||||
| thirteen | 189 | one hundred fifteen | 6.9 | 246 | |||||||
rewards
|
1. Simple for Upkeep, Lower cost for Routine maintenance All the pipe and spare components is standardized, they can be altered fast. 2. 6000sets ability for each month. As 1 of the greatest Air compressor Manufacture, with Advanced Automated Manufacturing Line, 6000set air compressor can be developed for every thirty day period. The creation cost is significantly decreased by the generation scale creation. Delivering the most price-effective merchandise for you. 3. Abundant expertise in compressed air method answer, 1 cease provider and supply air compressor program style We can give a single- cease remedy. We can not only supply the air compressor, but also substantial top quality air treatment equipment, such as air tank, air dryer, air filter, air pipe, valves and air compressor spare parts. Conserve your time and value tremendously. 4. Powerful R&D Ability Annual Growing R&D expenditure. Introduce German GU technologies and the Japanese Navy technologies. Lengthy- time period collaborative project with HangZhou Jiaotong College. |
Application
Product sales Service
Professional on-line advisor to fix your concern about compressor program.
√ Totally free internet site layout expert, and energy saving resolution to aid you help save procedure cost.
√ Negotiable technician obtainable to services machinery abroad.
√ On the web expert after-provider until finally remedy the dilemma.
√ 1 calendar year guarantee following commissioning or 16 months in opposition to shipping and delivery day, it relies upon on which 1 occur to start with for the total
device(except upkeep consumable).
√ A ample amount of spare elements are offered, make positive the great soon after provider.
Certificate
About mikovs
|
Mikovs Compressor
|
RFQ
Q1. Are you buying and selling company or manufacture ?
A: We are professional manufacture of screw air compressor more than 8 many years.
Q2. How extended is the supply time ?
A: For standard voltage ,fifteen working times. Non-normal ,remember to contact our income.
Q3. What is payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit rating Card, and and so on. Also we could acknowledge USD, RMB, Euro and other forex.
Q4. How about your soon after-product sales services ?
A: 1.Provide consumers with installation and commissioning on-line recommendations.
two. Well-educated engineers obtainable to abroad provider.
three.Worldwid brokers and after provider avaiable.set up our engineers to help you training and set up.
Q5. How about your warranty?
A: 1 yr for the whole equipment and 2 several years for screw air stop, besides consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per distinct customer’s market place require ,we can offer CE ,ISO etc certification.
Q7. What about the servicing ?
A: Very first maintenance need to be accomplished after 500Hours, and then every single 2000-3000 several hours to do the typical maintenance,
and take into account the real atmosphere.
Q8. How do you manage good quality ?
A: 1.Uncooked- substance in examining.
2.Assembly.
3.Worldwid following services obtainable.prepare our engineers to help you instruction and set up.
Q9. Do you provide OEM provider ?
A: Sure.
|
US $1,400-2,100 / set | |
1 set (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated| Freight Cost Calculator |
|---|
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
###
| Customization: |
Available
|
|---|
###
|
Product Name: Made in China ISO9001 Certificate |
 |
###
| MODEL | MAXIMUM WORKING PRESSURE | FREE AIR DELIVERY* OF UNIT AT WORKING PRESSURE | MOTOR | NOISE LEVEL | AIR OUTLET DISCHARGE SIZE | WEIGHT | DIMENSIONS | ||||
| Bar | PSI | l/s | m3/min | CFM | kW | HP | dBA | (mm) | KG | (mm) | |
| MCS-7.5 | 7 | 102 | 20 | 1.2 | 43 | 7.5 | 10 | 65±2 | G3/4 | 250 | 800 x 720 x 950 |
| 8 | 116 | 18 | 1.1 | 39 | |||||||
| 10 | 145 | 15 | 0.9 | 32 | |||||||
| 12 | 174 | 13 | 0.75 | 27 | |||||||
| 13 | 189 | 11 | 0.65 | 23 | |||||||
| MCS-11 | 7 | 102 | 28 | 1.65 | 59 | 11 | 15 | 70±2 | G3/4 | 350 | 950 x 800 x1160 |
| 8 | 116 | 25 | 1.5 | 54 | |||||||
| 10 | 145 | 22 | 1.3 | 46 | |||||||
| 12 | 174 | 18 | 1.1 | 39 | |||||||
| 13 | 189 | 17 | 1 | 36 | |||||||
| MSC-15 | 7 | 102 | 42 | 2.5 | 89 | 15 | 20 | 70±2 | G3/4 | 400 | 950 x 800 x 1160 |
| 8 | 116 | 38 | 2.3 | 82 | |||||||
| 10 | 145 | 35 | 2.1 | 75 | |||||||
| 12 | 174 | 32 | 1.9 | 68 | |||||||
| 13 | 189 | 28 | 1.7 | 61 | |||||||
| MCS-18.5 | 7 | 102 | 53 | 1.1 | 114 | 18.5 | 25 | 72±2 | G1 | 550 | 1150 x 900 x1380 |
| 8 | 116 | 50 | 2.5 | 107 | |||||||
| 10 | 145 | 45 | 2.3 | 96 | |||||||
| 12 | 174 | 40 | 2.4 | 86 | |||||||
| 13 | 189 | 35 | 2.1 | 75 | |||||||
| MCS-22 | 7 | 102 | 63 | 3.8 | 136 | 22 | 30 | 73±2 | G1 | 600 | 1150 x 900 x1380 |
| 8 | 116 | 60 | 3.6 | 129 | |||||||
| 10 | 145 | 53 | 3.2 | 114 | |||||||
| 12 | 174 | 45 | 2.7 | 96 | |||||||
| 13 | 189 | 38 | 2.3 | 82 | |||||||
| MCS-30 | 7 | 102 | 88 | 5.3 | 189 | 30 | 40 | 74±2 | G1 | 650 | 1150 x 900 x1380 |
| 8 | 116 | 83 | 5 | 179 | |||||||
| 10 | 145 | 75 | 4.5 | 161 | |||||||
| 12 | 174 | 67 | 4 | 143 | |||||||
| 13 | 189 | 60 | 3.6 | 129 | |||||||
| MCS-37 | 7 | 102 | 113 | 6.8 | 243 | 37 | 50 | 74±2 | G11/2 | 800 | 1320 x 1000 x1500 |
| 8 | 116 | 103 | 6.2 | 221 | |||||||
| 10 | 145 | 93 | 5.6 | 200 | |||||||
| 12 | 174 | 83 | 5 | 179 | |||||||
| 13 | 189 | 75 | 4.5 | 161 | |||||||
| MCS-45 | 7 | 102 | 123 | 7.4 | 264 | 45 | 60 | 74±2 | G11/2 | 900 | 1320 x 1000 x1840 |
| 8 | 116 | 117 | 7 | 250 | |||||||
| 10 | 145 | 103 | 6.2 | 221 | |||||||
| 12 | 174 | 93 | 5.6 | 200 | |||||||
| 13 | 189 | 83 | 5 | 179 | |||||||
| MCS-55 | 7 | 102 | 167 | 10 | 357 | 55 | 75 | 75±2 | G2 | 1300 | 1600 x 1470 x1460 |
| 8 | 116 | 153 | 9.2 | 329 | |||||||
| 10 | 145 | 142 | 8.5 | 304 | |||||||
| 12 | 174 | 127 | 7.6 | 271 | |||||||
| 13 | 189 | 115 | 6.9 | 246 | |||||||
###
|
1. Easy for Maintenance, Low cost for Maintenance All the pipe and spare parts is standardized, they can be changed fast. 2. 6000sets capacity for each month. As one of the largest Air compressor Manufacture, with Advanced Automatic Production Line, 6000set air compressor can be produced for each month. The production cost is greatly reduced by the production scale production. Providing the most cost-effective product for you. 3. Rich experience in compressed air system solution, one stop service and provide air compressor system design We can provide one- stop solution. We can not only provide the air compressor, but also high quality air treatment equipment, such as air tank, air dryer, air filter, air pipe, valves and air compressor spare parts. Save your time and cost greatly. 4. Strong R&D Capability Annual Increasing R&D investment. Introduce German GU technology and the Japanese Military technology. Long- term collaborative project with Xi’an Jiaotong University. |
###
|
Mikovs Compressor
|
|
|
US $1,400-2,100 / set | |
1 set (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated| Freight Cost Calculator |
|---|
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
###
| Customization: |
Available
|
|---|
###
|
Product Name: Made in China ISO9001 Certificate |
|
###
| MODEL | MAXIMUM WORKING PRESSURE | FREE AIR DELIVERY* OF UNIT AT WORKING PRESSURE | MOTOR | NOISE LEVEL | AIR OUTLET DISCHARGE SIZE | WEIGHT | DIMENSIONS | ||||
| Bar | PSI | l/s | m3/min | CFM | kW | HP | dBA | (mm) | KG | (mm) | |
| MCS-7.5 | 7 | 102 | 20 | 1.2 | 43 | 7.5 | 10 | 65±2 | G3/4 | 250 | 800 x 720 x 950 |
| 8 | 116 | 18 | 1.1 | 39 | |||||||
| 10 | 145 | 15 | 0.9 | 32 | |||||||
| 12 | 174 | 13 | 0.75 | 27 | |||||||
| 13 | 189 | 11 | 0.65 | 23 | |||||||
| MCS-11 | 7 | 102 | 28 | 1.65 | 59 | 11 | 15 | 70±2 | G3/4 | 350 | 950 x 800 x1160 |
| 8 | 116 | 25 | 1.5 | 54 | |||||||
| 10 | 145 | 22 | 1.3 | 46 | |||||||
| 12 | 174 | 18 | 1.1 | 39 | |||||||
| 13 | 189 | 17 | 1 | 36 | |||||||
| MSC-15 | 7 | 102 | 42 | 2.5 | 89 | 15 | 20 | 70±2 | G3/4 | 400 | 950 x 800 x 1160 |
| 8 | 116 | 38 | 2.3 | 82 | |||||||
| 10 | 145 | 35 | 2.1 | 75 | |||||||
| 12 | 174 | 32 | 1.9 | 68 | |||||||
| 13 | 189 | 28 | 1.7 | 61 | |||||||
| MCS-18.5 | 7 | 102 | 53 | 1.1 | 114 | 18.5 | 25 | 72±2 | G1 | 550 | 1150 x 900 x1380 |
| 8 | 116 | 50 | 2.5 | 107 | |||||||
| 10 | 145 | 45 | 2.3 | 96 | |||||||
| 12 | 174 | 40 | 2.4 | 86 | |||||||
| 13 | 189 | 35 | 2.1 | 75 | |||||||
| MCS-22 | 7 | 102 | 63 | 3.8 | 136 | 22 | 30 | 73±2 | G1 | 600 | 1150 x 900 x1380 |
| 8 | 116 | 60 | 3.6 | 129 | |||||||
| 10 | 145 | 53 | 3.2 | 114 | |||||||
| 12 | 174 | 45 | 2.7 | 96 | |||||||
| 13 | 189 | 38 | 2.3 | 82 | |||||||
| MCS-30 | 7 | 102 | 88 | 5.3 | 189 | 30 | 40 | 74±2 | G1 | 650 | 1150 x 900 x1380 |
| 8 | 116 | 83 | 5 | 179 | |||||||
| 10 | 145 | 75 | 4.5 | 161 | |||||||
| 12 | 174 | 67 | 4 | 143 | |||||||
| 13 | 189 | 60 | 3.6 | 129 | |||||||
| MCS-37 | 7 | 102 | 113 | 6.8 | 243 | 37 | 50 | 74±2 | G11/2 | 800 | 1320 x 1000 x1500 |
| 8 | 116 | 103 | 6.2 | 221 | |||||||
| 10 | 145 | 93 | 5.6 | 200 | |||||||
| 12 | 174 | 83 | 5 | 179 | |||||||
| 13 | 189 | 75 | 4.5 | 161 | |||||||
| MCS-45 | 7 | 102 | 123 | 7.4 | 264 | 45 | 60 | 74±2 | G11/2 | 900 | 1320 x 1000 x1840 |
| 8 | 116 | 117 | 7 | 250 | |||||||
| 10 | 145 | 103 | 6.2 | 221 | |||||||
| 12 | 174 | 93 | 5.6 | 200 | |||||||
| 13 | 189 | 83 | 5 | 179 | |||||||
| MCS-55 | 7 | 102 | 167 | 10 | 357 | 55 | 75 | 75±2 | G2 | 1300 | 1600 x 1470 x1460 |
| 8 | 116 | 153 | 9.2 | 329 | |||||||
| 10 | 145 | 142 | 8.5 | 304 | |||||||
| 12 | 174 | 127 | 7.6 | 271 | |||||||
| 13 | 189 | 115 | 6.9 | 246 | |||||||
###
|
1. Easy for Maintenance, Low cost for Maintenance All the pipe and spare parts is standardized, they can be changed fast. 2. 6000sets capacity for each month. As one of the largest Air compressor Manufacture, with Advanced Automatic Production Line, 6000set air compressor can be produced for each month. The production cost is greatly reduced by the production scale production. Providing the most cost-effective product for you. 3. Rich experience in compressed air system solution, one stop service and provide air compressor system design We can provide one- stop solution. We can not only provide the air compressor, but also high quality air treatment equipment, such as air tank, air dryer, air filter, air pipe, valves and air compressor spare parts. Save your time and cost greatly. 4. Strong R&D Capability Annual Increasing R&D investment. Introduce German GU technology and the Japanese Military technology. Long- term collaborative project with Xi’an Jiaotong University. |
###
|
Mikovs Compressor
|
|
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by czh 2023-01-01